Kreg Drawer Slide Jig Manual

31 Oct, 2021

See full description and specs. The drawer slide jig takes the guesswork out of installing drawer slides.

Jigs and Templates 179686 Kreg Jig Tool Company Khislide

Clamp it to the door or drawer front in the desired.

Kreg drawer slide jig manual. The drawer slide jig takes the guesswork out of installing drawer slides. I've used the kreg jig for many hundreds of shelf pin holes and slide mounting holes. The jig is simple to use, and it ensures that every drawer fits right and operates smoothly.

Then holding the drawer down against the kreg jig, mark one hole of the slide on the side of the drawer, with a sharp pencil. These are identical except for the included drill bit so now i can do either. The drawer slide jig consists of two brackets that clamp in place inside the cabinet—one on each cabinet side—and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes.

Download manual (pdf) the drawer slide jig takes the guesswork out of installing drawer slides. We recommend that you use a jig (such as a kreg drawer slide jig) to make sure you install the slide square and level. The drawer slide jig takes the guesswork out of installing drawer slides.

The drawer slide jig takes the guesswork out of installing drawer slides. The drawer slide jig takes the guesswork out of installing drawer slides. Make sure the drawer slides are extended out and touching the back of the drawer face.

The drawer slide jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. I bought 2 of the jigs, one for 5mm holes and one for 1/4 holes. The drawer slide jig takes the guesswork out of installing drawer slides.

The kreg cabinet hardware jig is making drilling doors for handles that so much easier and faster. The brackets are also reversible to protrude from the cabinet, and then clamp in place. Screw the slide to the face frame first, setting the slide back 1/8” from the front edge of the cabinet (to allow room for the drawer to.

You’ll only need to mark the front hole at this time. Kreg drawer slide jig manual (nk8808).pdf author: The drawer slide jig takes the guesswork out of installing drawer slides.

Essentially, a bracket gets clamped to either side of the drawer opening. The hardened steel drill guides mean that the drill guides will not wear out, the edge to centre adjustment is going to cater for most desired handle positioning, and the drill guide spacing caters for standard 64mm, 96mm and 128mm handles.

109 reference of drawer slide jig rockler vs kreg in 2020